VP-VISION PLUS

THE MOST FLEXIBLE PLATE MOUNTER ON THE MARKET

VP-VISION PLUS
Site map:
Plate mounters > Wide web flexo > VP-VISION PLUS
OVER 700 MACHINES SOLD WORLDWIDE
DOWNLOAD BROCHURE
Overview
VP-VISION PLUS is completely configurable

SLEEVES version
DESIGNED FOR A FAST SLEEVES CHANGE-OVER
Our mounter in SLEEVES mechanica configuration is equipped with a cantilever pivoting mandrel, for a very fast and reliable sleeves change-over.
Changing a sleeves is matter of seconds !
UNIVERSAL version
DESIGNED TO WORK WITH SLEEVES + CYLINDERS
The mounter in UNIVERSAL configuration is projected to work with sleeves mandrels and solid iron rolls.
The mandrels and the rolls will lay on bearings support, and the mandrel will be managed in cantilever for the sleeves change-over by a very nice electronic lifting up system.
With this machine you can manage all presses in your pressroom on the same plate mounter.
Highlights about VP-VISION PLUS
We let the technology speaks for itself.
MECHANICAL CONFIGURATION AVAILABLE FOR:
SLEEVES
CYLINDERS
UNIVERSAL (sleeves + cylinders)
TECHNICAL FEATURES:
Cameras:
2 autofocus cameras
270x magnification (37x optical, 270x digital)
24 bit colors

Camera movement:
MANUAL (EASY) / MOTORIZED (HT)
(manual movement is always avalaible, patented system)

Cylinder / mandrel rotation:
MANUAL (EASY) / MOTORIZED (HT)
(brushless gearless servo-motor available as option)

Encoder on mandrel for control of the rotation:
INCLUDED ON HT
ELECTRONICS CONFIGURATION:
EASY (BASIC CONFIGURATION), COMES WITH:
Autofocus cameras
Manual operated
Virtual Image
HT (ADVANCED CONFIGURATION), COMES WITH:
Autofocus cameras
Fully motorized
Jobs saving
PDF mounting
Virtual Image
SOFTWARE:
PHOTO SPLIT for WINDOWS
VIRTUAL IMAGE
VIRTUAL IMAGE PLUS (jobs filing managment) : on HT VERSION
PDF MOUNTING: on HT VERSION
SOFTWARE FOR STAGGERED MOUNTING: on HT VERSION
REMOTE ASSISTANCE
o/s WINDOWS 7 PRO ENG
OPTIONS FOR VP PLATE MOUNTERS
A LARGE CHOICE OF OPTIONS AVAILABLE TO PERSONALIZE YOUR MACHINE
ADDITIONAL CAMERAS
up to 8 cameras can be installed
PRESSURE ROLLER
a nip roller to smoothly press the sleeves surface,
DOUBLE MOUNTING TABLE
a double table to mount the plate in flat
PLATE EDGE CUTTER
in-line cutting system for plate edge
FRAME FOR CUTTING TAPE
frame for guiding the hand-cutter blade for cutting sticky-back
FLEXO CUTTER
off-line plate cutter
DISPENSER FOR STICKY BACK
a sliding shuttle for automatic tape dispensing
BRUSHLESS MOTOR
the power of the direct drive motor
TOUCH SCREEN MONITOR
an easy interface for the operator
STAGGERED MOUNTING SOFTWARE
software for program multiple plate mounting
PDF MOUNTING
SOFTWARE
using the repro PDF file in overlay
DEMOUNTER
easy removal of the plates
Virtual Image
The core of our plate mounters is based on Virtual Image system (patented).
Virtual Image allows you to obtain an easy, fast and reliable virtual proof on video, overlaying the virtual image of the reference plate with the real image of the plate during mounting.
The virtual image can also be a PDF repro file, that can be used as reference in overlay.
Therefore, with Virtual Image it is possible to mount plates without marking-crosses or other reference points, because any part of plate can be referenced for the following one.
Gallery VP-VISION PLUS
A closer look
Some short video to explain the difference among the different versions of VP

A look at the VP-VISION PLUS, version EASY (VP-EASY)
Very fast and reliable mounting with the VP-EASY version: manual movement of the cameras and motorized rotation of the mandrel.
In combination with the nip-roller for a smooth application of the sticky-back.
A look at the VP-VISION PLUS, version HT (VP-HT)
In this version, the VP-VISION PLUS mounter is upgraded with motorized configuration.
The motors for cameras and mandrel/cylinders are available as options for the VP-VISION PLUS mounter: all the axis can be motorized.
Staggered mounting on a VP-HT
Full demo of a staggered mounting for a three lanes job. Automatic angular positioning of the sleeve and automatic camera movement.
The Universal version to mount sleeves + cylinders
A demo of the Universal version of the VP-VISION PLUS MOUNTER, designed to work with both air mandrels and solid iron rolls.
Special versions
We’ve developed some additional models of our mounters, to offer a smoother mounting experience:

· VP-DEM
mounter + demounter integrated
The first plate mounter on the market that combines the mounting and demounting technology, on the same machine!
VP-ARROW
speedlight cameras
The new plate mounting machine that integrates a new camera positioning system with linear motion: an incredible movement speed in addition to perfect positioning accuracy

THE MOST FLEXIBLE PLATE MOUNTER ON THE MARKET

Site map:

OVER 700 MACHINES SOLD WORLDWIDE

Overview

VP-VISION PLUS is completely configurable

SLEEVES version

DESIGNED FOR A FAST SLEEVES CHANGE-OVER

UNIVERSAL version

DESIGNED TO WORK WITH SLEEVES + CYLINDERS

Highlights about VP-VISION PLUS

We let the technology speaks for itself.

MECHANICAL CONFIGURATION AVAILABLE FOR:

TECHNICAL FEATURES:

ELECTRONICS CONFIGURATION:

SOFTWARE:

OPTIONS FOR VP PLATE MOUNTERS

A LARGE CHOICE OF OPTIONS AVAILABLE TO PERSONALIZE YOUR MACHINE

ADDITIONAL CAMERAS

PRESSURE ROLLER

DOUBLE MOUNTING TABLE

PLATE EDGE CUTTER

FRAME FOR CUTTING TAPE

FLEXO CUTTER

DISPENSER FOR STICKY BACK

BRUSHLESS MOTOR

TOUCH SCREEN MONITOR

STAGGERED MOUNTING SOFTWARE

PDF MOUNTINGSOFTWARE

DEMOUNTER

Virtual Image

Gallery VP-VISION PLUS

A closer look

Some short video to explain the difference among the different versions of VP

A look at the VP-VISION PLUS, version EASY (VP-EASY)

A look at the VP-VISION PLUS, version HT (VP-HT)

Staggered mounting on a VP-HT

The Universal version to mount sleeves + cylinders

Special versions

We’ve developed some additional models of our mounters, to offer a smoother mounting experience:

· VP-DEM

mounter + demounter integrated

VP-ARROW

speedlight cameras

PDF MOUNTING
SOFTWARE